Home > CONFIGURATION GUIDE > Dvr configuration for DIPS model Q5149H-F , Q5189H-F , and Q5169H-F :

Dvr configuration for DIPS model Q5149H-F , Q5189H-F , and Q5169H-F :

STEP 1 : Make sure that everything is connected to the DVR (router, monitor, and mouse)
STEP 2: In the DVR: Go to MAIN MENU by pressing the right click of the mouse. Click the SETTINGS then NETWORK.
 ( DEFAULT IP: 192.168.1.108 -  DEFAULT GATEWAY : 192.168.1.1)




STEP 3: Enable the DHCP then save the settings and go to Operation click the Shutdown then Reboot  the DVR. (Notice: if DHCP is highlighted, it means enabled)


STEP 4:  Reboot your DVR.

STEP 5; After you Enable the Register go again to Network then select the P2P to set as Enable or check the box to be ONLINE the status from being OFFLINE, then select Apply and Save.


STEP 6: After setting the P2P setup, Select your INFO then click your SYSTEM going to VERSION to check your SERIAL NUMBER then copy it first.


STEP 7: Click system under that click VERSION And Copy the Serial.